Polishing & Paint Correction

Diamond Cut 3000

Extreme cutting compound. Removes sanding marks and restores the paint easily.

Diamond Cut 3000 is an extreme cutting compound. This compound is suitable for paint rectification and ceramic/scratch resistant paintwork. Diamond Cut 3000 removes all sanding marks, overspray, orange peel, paint runs and dust easily.

Coarse
APPLICATION
  1. Determine the working surface within shoulder width and six times the area of the polishing pad.
  2. Apply 3 pea-sized dots (for ⌀150mm) of Cartec Diamond Cut 3000 to the polishing pad.
  3. • Rotary: take the Cartec green pad for rotary machines (RF2110 for ⌀150mm). Spread the product on the lowest setting and increase the speed to 1200 – 1500 rpm.
    • Dual Action: Take the Cartec green pad for dual action machines (RF2116 for ⌀150mm). Spread the product on the lowest setting and increase the speed to 3500 – 4800 rpm.
  4. Work in sections while applying even pressure. Continue until the scratches are removed.
  5. Clean the surface thoroughly with the Cartec Microfibre Cloth Green (RF2203C) to remove all polish residue.
BENEFITS
  • Fast and deep cutting
  • Time-saving
  • Easy to buff off
  • Provides instant high gloss
  • Free of silicones, ammonia and fillers
DOWNLOADS

Technical Datasheet

Request the MSDS at safety@cartecworld.com.

TIPS & TRICKS
  • Use Cartec Panel Spray (REFLSP) to completely degrease the surface, remove remaining polish residue and review the actual condition of the paintwork.
  • When using a rotary polisher, do not keep polishing in the same spot for too long to avoid overheating the paintwork.

Cartec
World