When used on paintwork:

1. Spray Cartec Iron Wash on the surface to be treated and then leave it to act for 5-10 minutes.
2. After a few minutes, the fly rust and brake dust present will turn purple. A sponge or a clay product (such as 3041/3) can be used to speed up the process. For stubborn dirt, the treatment can be repeated.

When used on rims:

1. Spray Cartec Iron Wash on the rim or hubcap. make sure to touch everything well.
2. Wait until the product turns purple and leave it to act for a maximum of 1 minute.
3. Remove the dirt with a pressure washer, before the purple colour changes to brown.
4. In case of persistent soiling, the treatment can be repeated. Use the Wheelsan brush (3039/4) to soak off the dirt.

Warning: always check the product before use in an inconspicuous place to avoid any damage. Do not use the product on galvanised steel. do not allow the product to dry.

• pH neutral product
• Safe to use
• Can also be used as a pre-cleaner
• Visible result due to purple discolouration of the particles
• Fast result
• Viscous product, resulting in longer soaking time
• Can be used on both bodywork and rims

Technical Datasheet

Request the MSDS at safety@cartecworld.com.

• Cartec Iron Wash works very well to decontaminate paintwork in combination with a Cartec clay product such as (3041/3).
• Clean the paintwork with a pre-cleaner (such as Cartec Twister Comfort (1407), before using Cartec Iron Wash in combination with a sponge or Clay pad. This is to prevent scratching.